A professional roof inspection shouldn’t be a mystery. If you’ve scheduled one—or you’re thinking about it—here’s exactly what to expect when All Seasons Roofing visits your Hemet home.
Our Hemet Roofing experts recommend regular inspections to catch small issues early, extend roof life, and protect warranties, especially in Southern California’s heat, wind, and seasonal rains.
The Short Answer: What Happens During an Inspection
- Safety setup and check-in
- Exterior/roof-surface evaluation (shingles/tiles/metal, flashings, penetrations)
- Gutter, fascia, and drainage review
- Attic and interior moisture assessment
- Photos, measurements, and documentation
- Clear, written report with prioritized recommendations and next steps
Our Hemet Roofing experts recommend setting aside 60–120 minutes for a standard single-family home, longer for complex or multi-level roofs.
Before We Arrive: How to Prepare
A little prep helps us work efficiently and safely:
- Clear driveway access for ladders and equipment.
- Secure pets and ensure gate access to side yards.
- Note problem areas (ceiling stains, musty odors, recent leaks) and have them ready to discuss.
- Gather warranties or past invoices if available; our Hemet Roofing experts recommend keeping a maintenance file for warranty compliance.
Step 1: On-Site Check-In and Safety
You’ll meet your inspector, review goals, and point out any concerns. We set up ladders, harnesses, and fall protection as needed. Safety is non-negotiable—especially on tile and steep-slope roofs. Our Hemet Roofing experts recommend homeowners avoid climbing the roof; we’ll document everything with photos and walk you through findings.
Step 2: Exterior Scan—From Curb to Ridge
We begin with a ground-level scan to spot red flags before going up:
- Missing, slipped, or cracked shingles/tiles
- Loose or rusted metal panels and exposed fasteners
- Debris in valleys and gutters
- Sagging eaves, fascia, or soffits
- Tree abrasion points and overhanging limbs
In Hemet and the San Jacinto Valley, dust, leaves, and hot-cold cycles accelerate wear. Our Hemet Roofing experts recommend trimming trees away from the roof to prevent abrasion and clogged drainage.
Step 3: Roof Surface and Components
On the roof, we perform a systematic evaluation:
- Shingles/tiles/metal panels: Look for curling, blisters, granule loss, cracks, impact marks, or coating wear.
- Flashings: Chimney, skylight, wall, and step flashings checked for corrosion, gaps, and sealant failure.
- Penetrations: Pipe boots, vents, and solar mounts inspected for cracked rubber, lifted seals, or loose fasteners.
- Ridges and hips: Condition of caps, mortar (for tile), and wind damage.
- Low-slope areas: Seams, laps, and ponding on TPO/PVC/modified bitumen.
- Sealants and joints: UV cracking and premature drying common in SoCal sun.
Our Hemet Roofing experts recommend avoiding foot traffic on clay or concrete tile; we use specialized walk paths and techniques to prevent breakage.
Step 4: Gutters, Edges, and Drainage
Effective drainage is the difference between a dry attic and a hidden leak:
- Gutters/downspouts: Clogs, sagging, improper pitch, or separation from fascia.
- Drip edge and eave protection: Ensures water sheds cleanly into gutters.
- Valleys and crickets: Debris traps where leaks often start.
If we find debris, we’ll clear critical areas during the inspection when safe. Our Hemet Roofing experts recommend seasonal gutter cleaning—especially after Santa Ana winds or fall leaf drop.
Step 5: Attic and Interior Moisture Check
A roof can look fine on top while leaking underneath. We inspect:
- Sheathing for staining or delamination
- Insulation for dampness or mold
- Ventilation (intake/exhaust balance to reduce heat and moisture)
- Daylight at penetrations where it shouldn’t be visible
We may use moisture meters and thermal imaging to detect hidden leaks or insulation gaps. Our Hemet Roofing experts recommend pairing roof inspections with attic checks—this is where early warning signs often show up first.
Tools and Technology You Might See
- Drones for steep or fragile areas where foot access isn’t safe.
- High-resolution photography for detailed documentation.
- Moisture meters and IR cameras to spot concealed moisture.
- Shingle gauges and fastener checks on certain systems.
- Sealant and minor repair kits for on-the-spot maintenance with your approval.
Our Hemet Roofing experts recommend using technology as a supplement—not a substitute—for hands-on evaluation.
Your Inspection Report: What You’ll Receive
All Seasons Roofing provides a clear, homeowner-friendly packet, typically the same day or within 24–48 hours:
- Photo documentation with annotations
- Condition grading (good, watch, repair soon, urgent)
- Prioritized recommendations separating maintenance from repairs
- Estimated timelines to address issues
- Budget guidance and warranty considerations
- Maintenance plan tailored to your roof type and age
Our Hemet Roofing experts recommend keeping every report for your records; it helps with warranties, resale, and insurance.
Common Findings in Hemet (and What They Mean)
- UV-cracked sealants and pipe boots: Minor now, leak risk later; quick maintenance item.
- Loose or lifted shingles/tiles after winds: Re-secure or replace to prevent water intrusion.
- Debris-filled valleys/gutters: Clean to restore drainage and avoid overflow damage.
- Tile underlayment aging: Tiles may look fine, but underlayment can fail; plan ahead for phased replacement.
- Metal roof fastener back-out: Retighten/replace and reseal to stop capillary leaks.
- Ventilation imbalance: Add intake/exhaust to reduce heat load and extend shingle life.
Our Hemet Roofing experts recommend addressing minor issues during the visit when possible to keep small problems from growing.
How Long It Takes and What It Costs
- Duration: Most inspections take 1–2 hours; large or complex roofs can take longer.
- Cost: Fees vary by roof size, pitch, and access. Many homeowners find that a paid, detailed inspection with photos and a plan saves money by preventing emergency repairs.
- Insurance and warranties: If storm damage is suspected, we’ll document to industry standards. Our Hemet Roofing experts recommend calling us first; we can advise whether a claim is likely to be warranted.
Ask about All Seasons Roofing’s maintenance bundles for predictable, seasonal care.
After the Inspection: Your Next Steps
- Immediate maintenance: Debris clearing, sealant touch-ups, fastener tightening, and small part replacements (with your approval).
- Scheduled repairs: We’ll provide options by urgency and budget.
- Preventive care plan: Our Hemet Roofing experts recommend semiannual checkups for older roofs or homes under trees, and annual checks for newer systems.
- Homeowner tips: Trim branches, keep gutters clean, watch for interior stains, and schedule post-storm checkups after significant winds or heavy rain.
FAQs Homeowners Ask
- Do I need to be home? It helps for the attic check and walkthrough, but we can coordinate if you can’t be there.
- Will you walk every roof? Safety and roof type dictate access. We use drones or long-reach tools when walking isn’t safe (e.g., fragile tile).
- Can issues be fixed on the spot? Often yes for minor items. Larger repairs are scheduled with a written estimate.
- Will this affect my warranty? Regular maintenance supports warranty compliance. Our Hemet Roofing experts recommend documenting every visit.
Ready to Book Your Hemet Roof Inspection?
All Seasons Roofing delivers thorough, photo-documented inspections tailored to Hemet’s climate and roof systems across Riverside County. Whether you’ve noticed a stain, weathered a wind event, or it’s simply time for upkeep, our Hemet Roofing experts recommend getting ahead of issues with a professional inspection. Contact All Seasons Roofing today to schedule your visit and get a clear, actionable plan to protect your home—season after season.