If you’re wondering how often to bring in a roofer for inspection or maintenance, here’s the short answer: at least once a year—and ideally twice—plus after any major wind or rain event.
That cadence protects against leaks, preserves warranties, and extends your roof’s lifespan. At All Seasons Roofing, our Hemet Roofing experts experts recommend a proactive schedule tailored to your roof’s age, material, and local weather patterns so you can catch small issues before they become costly repairs.
Quick Answer: The Ideal Roof Inspection Frequency
- Minimum: 1 professional inspection per year
- Best practice: 2 professional inspections per year (spring and fall)
- Additionally: After severe wind, heavy rain, hail, or wildfire ash events
- For older roofs (16+ years): Semiannual professional inspections, plus quarterly curbside visual checks
Why so often? In the Hemet and Inland Empire area, intense sun, Santa Ana winds, and seasonal downpours can quickly stress shingles, tile underlayment, flashing, and sealants. Our Hemet Roofing experts experts recommend building inspections into your home’s routine maintenance—just like HVAC service or gutter cleaning.
Why Frequency Matters in Southern California
- UV and heat exposure: High UV breaks down asphalt binders and dries out sealants, speeding up aging.
- Wind and debris: Santa Ana winds can lift shingles, dislodge tiles, and shift flashing; debris can clog valleys and gutters.
- Rain bursts: Long dry periods followed by heavy rain exploit even tiny vulnerabilities, turning hairline gaps into active leaks.
- Wildfire ash and dust: Fine particulates trap moisture and accelerate corrosion on metal components.
Because these conditions stack up over time, our Hemet Roofing experts experts recommend preventative maintenance as the most cost‑effective strategy, especially for roofs nearing mid-life.
Recommended Schedule by Roof Age and Type
- New or recently replaced roofs (0–5 years)
- Frequency: Annual inspection
- Focus: Baseline documentation, flashing and sealant check, ventilation balance, and warranty compliance.
- Mid-life roofs (6–15 years)
- Frequency: Twice per year (spring and fall)
- Focus: Early wear on shingles, underlayment condition beneath tile, fastener back-out on metal, and penetrations.
- Aging roofs (16+ years)
- Frequency: Twice per year + after severe weather
- Add-on: Quarterly visual checks from the ground for missing shingles, slipped tiles, or sagging eaves.
- By roof type
- Asphalt shingles: Heat and UV accelerate granule loss—twice yearly.
- Concrete/clay tile: The tile lasts; underlayment is the weak link. Semiannual.
- Metal: Annual to semiannual; check fasteners, seams, and coatings.
- Flat/low‑slope: Semiannual minimum; keep drains clear and monitor for ponding.
Our Hemet Roofing experts experts recommend tailoring the schedule if you have skylights, solar panels, or lots of nearby trees—all of which add maintenance touchpoints.
Events That Should Trigger an Immediate Inspection
- Wind gusts strong enough to move patio furniture or break branches
- Heavy downpours or hail
- Wildfire ash fall or dust storms
- Nearby construction causing vibration or debris
- Any impact (falling limbs, satellite dish adjustments, roof foot traffic)
A quick post-event check can prevent a minor sealant failure from turning into ceiling stains or mold.
What a Professional Roof Inspection Includes
At All Seasons Roofing, our inspections are methodical and photo-documented so you can see exactly what we see. Our Hemet Roofing experts experts recommend focusing on:
- Roof surface: Shingle granule loss, lifted tabs, cracked tiles, metal oxidation, membrane punctures
- Flashing and penetrations: Chimneys, skylights, solar mounts, vents, satellite brackets
- Edges and details: Eaves, rakes, ridge caps, valleys, transitions, and wall tie-ins
- Gutters and drainage: Debris load, slope, downspout flow, signs of overflow
- Attic/interior: Ventilation adequacy, moisture readings, insulation condition, daylight at penetrations
- Documentation: Photos, prioritized punch list, and maintenance recommendations
When needed, we can leverage drones for steep roofs and infrared tools to spot hidden moisture.
Maintenance That Extends Roof Life
Maintenance isn’t just cleaning—it’s targeted, seasonal care that keeps water moving and seals intact. Our Hemet Roofing experts experts recommend:
- Debris removal: Clear valleys, behind chimneys, and around skylights/solar mounts
- Gutter and downspout cleaning: Prevent overflow that can rot fascia and underlayment
- Flashing tune-ups: Re-secure, reseal, or replace corroded or lifted flashing
- Sealant refresh: Around penetrations and terminations where UV degrades caulks
- Shingle/tile repairs: Replace missing or cracked pieces; reset slipped tiles
- Fastener checks: Tighten or replace backed-out screws on metal roofs
- Flat roof care: Clean drains and scuppers; evaluate protective coatings
- Moss/algae treatment: Use roof-safe solutions; avoid pressure washing
- Ventilation assessment: Balance intake/exhaust to reduce heat and condensation
Pro tip: Bundle maintenance with inspections to minimize site visits and get ahead of seasonal weather shifts.
DIY Checks vs. Professional Service
- Safe DIY from the ground:
- Scan for missing shingles/tiles, sagging, or shiny nails
- Look for shingle granules in gutters
- Check ceilings/attic for stains or musty odors
- Leave to the pros:
- Walking on tile or steep roofs
- Flashing repairs and penetrations
- Sealant selection and application
- Diagnostics for hidden moisture
Roof safety is critical—falls and broken tiles are common DIY mishaps. Our Hemet Roofing experts experts recommend scheduling professional service and keeping your own checks to binoculars and photographs from the ground.
Signs You Shouldn’t Wait for Your Next Scheduled Inspection
- New water stains on ceilings or walls
- Drips during storms or light “misting” at vents
- Persistent musty smell in attic or top-floor rooms
- Sudden spikes in energy bills (ventilation or envelope issues)
- Curling, cupping, or missing shingles; slipped or cracked tiles
- Rust streaks or exposed fasteners on metal roofs
- Ponding water on flat roofs after 48 hours
Even small symptoms can signal bigger issues under the surface. A quick visit now often saves hundreds later.
Will My Warranty or Insurance Require Inspections?
Many manufacturer warranties and some insurance policies expect proof of routine maintenance. Photo reports, receipts, and documented repairs establish that you’ve cared for the roof and didn’t let preventable damage escalate. All Seasons Roofing provides detailed inspection reports you can keep for your records. Our Hemet Roofing experts experts recommend annual documentation as the safest path for warranty compliance.
How Long Does an Inspection Take—and What Does It Cost?
- Time: Most single-family home inspections take 45–90 minutes, plus reporting time
- Cost: Varies by roof complexity and access; bundled maintenance is often the best value
Ask about combining gutter cleaning and minor tune-ups during the same visit—one trip, multiple tasks handled.
The Bottom Line: A Simple Maintenance Plan
- Schedule spring and fall professional inspections
- Add a post-storm check after major winds or rain
- Increase frequency as your roof ages or if you have skylights, solar, or flat sections
- Keep photo documentation for warranties and insurance
- Act quickly on small repairs
Day in and day out, that cadence keeps water out and your home protected.
Schedule Your Roof Inspection with All Seasons Roofing
Protect your home with a plan you can set and forget. All Seasons Roofing serves Hemet and the surrounding Inland Empire with thorough inspections, honest recommendations, and skilled maintenance. Our Hemet Roofing experts experts recommend starting with a baseline evaluation—then we’ll build a custom schedule based on your roof’s age, material, and exposure.Ready to get on the calendar? Contact All Seasons Roofing today to book your roof inspection and keep your roof performing season after season.